Repairing a Hole in a Fiber Glass Jet Ski Body

İngilizce

İtalyanca

Adım 9 çevriliyor

Adım 9

Once dry, it is time to move onto the front side of the hole.
Use the sharpie to carefully outline the shape of the hole and then cut out the shape with your scissors, again making multiple layers.
It is important to outline the shape because you want the end result to be flush with the existing surface unlike the back side of the hole.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.