Repairing a Hole in a Fiber Glass Jet Ski Body

Adım 11 çevriliyor

İngilizce

Fransızca

Adım 11

Once dry, confirm that the resin has fully hardened.
Use the sand paper to sand the resin surface and existing surface to create a seamless finish.
Once again, start with the rough sand paper and then finish sanding with the fine.
After sanding, the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.