Eşyalarını Tamir Et Topluluk Mağaza

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

Kılavuza Dön
İngilizce
Fransızca
Adım 4
Trek 800 Bicycle Rear Tire Bike Tube Replacement: adım 0, 2 resimden 1. Trek 800 Bicycle Rear Tire Bike Tube Replacement: adım 0, 2 resimden 2.

  • Locate the skewer on the center of the wheel attached to the bicycle frame slots.

  • Turn the skewer lever away from the bicycle.

  • Turn the skewer cap counter clockwise.

  • Once it is loose enough, you can pull the tire off, but do not pull it yet entirely off.

  • If your bike does not have a quick release for the wheel, you will need to unscrew the axle nut.

  • Some anti-theft gravity nuts require the bike to be upside down, others need a special wrench. However, you'll know if you have bought such an anti-theft device.

Tirez sur le levier de serrage rapide du moyeu arrière.

Tournez maintenant le levier pour desserrer le dispositif de serrage rapide.

Il sera suffisamment desserré lorsque la roue pourra être retirée, mais ne la retirez pas tout de suite.

Si votre roue de vélo ne dispose pas d'un serrage rapide, vous devrez dévisser l'écrou.

Pour certains écrous antivol, il faut mettre le vélo à l'envers pour pouvoir le dévisser. Pour d'autres, il faut une clé spéciale, mais normalement vous devez savoir si vous avez acheté un tel équipement antivol.

-[* black] Unscrew quick release lever found where the bike frame is attached to the rim of the tire.
-[* black] Turn the lever then the quick release cap will unscrew "lefty-loosey".
-[* black] Once it is loose enough you can pull the tire off, but do not pull it yet entirely off.
-[* black] If your bike does not have a quick release for the wheel, you will need to unscrew the axle nut.
-[* icon_note] Some anti-theft nuts require turn the bike upside down, other need a special wrench. However, you'll know best if you have bought such an anti-theft device.
+[* red] Locate the skewer on the center of the wheel attached to the bicycle frame slots.
+[* black] Turn the skewer lever away from the bicycle.
+[* black] Turn the skewer cap counter clockwise.
+[* black] Once it is loose enough, you can pull the tire off, but do not pull it yet entirely off.
+[* icon_note] If your bike does not have a quick release for the wheel, you will need to unscrew the axle nut.
+[* icon_note] Some anti-theft gravity nuts require the bike to be upside down, others need a special wrench. However, you'll know if you have bought such an anti-theft device.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.