Ana içeriğe geç

Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
İspanyolca

Adım 2 çevriliyor

Adım 2
Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: adım 0, 3 resimden 1. Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: adım 0, 3 resimden 2. Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: adım 0, 3 resimden 3.
  • Tilt top casing up and towards you.

  • Carefully remove the right ribbon-wire from the top camera panel by pulling where the wire connects to the top.

  • Make sure to hold the camera with your thumb on the white square to ensure the ribbon-wire is not disconnected from the motherboard.

  • Carefully remove the left ribbon-wire from the top camera panel by pulling where the wire connects to the top.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.