Eşyalarını Tamir Et Topluluk Mağaza

Remplacement du clavier du Gateway 600YG2

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Önceki adım

Adım 2 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 2
Gateway 600YG2 Keyboard Replacement: adım 0, 2 resimden 1. Gateway 600YG2 Keyboard Replacement: adım 0, 2 resimden 2.

  • Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.

  • Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.

  • Follow the black ribbon cable to the connector and gently pull straight up.

ATTENTION : lorsque vous retirez le clavier, ne le soulevez pas vers le haut, retournez-le du côté de la barre espace.

NE TIREZ PAS sur le câble noir pour le débrancher ; débranchez-le en tirant sur la base du câble, prêt du connecteur.

Suivez le câble noir jusqu'à sa base et tirez-le doucement vers le haut.

-[* icon_caution] CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge.
-[* icon_caution] DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself.
+[* icon_caution] Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.
+[* icon_caution] Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.
[* red] Follow the black ribbon cable to the connector and gently pull straight up.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.