Ana içeriğe geç

Remplacement du modèle flash du Sony Cyber-shot DSC-T1

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

İngilizce
Fransızca

Adım 1 çevriliyor

Adım 1
Sony Cyber-shot DSC-T1 Flash Module Replacement: adım 0, 3 resimden 1. Sony Cyber-shot DSC-T1 Flash Module Replacement: adım 0, 3 resimden 2. Sony Cyber-shot DSC-T1 Flash Module Replacement: adım 0, 3 resimden 3.
  • This camera houses a very strong capacitor (the black cylinder). Avoid touching anything around the two wires coming out of the top. Doing so will risk serious electric shock.

  • Carefully disengage the internal components from the casing by lifting at the bottom end and giving a gentle tug.

  • The components are still connected to the casing via cables, but they are much more maneuverable.

  • The flash module is shown on the right hand side.

Cette caméra abrite un condensateur très puissant (le cylindre noir). Évitez de toucher quoi que ce soit autour des deux fils sortant du haut. Cela risquerait un choc électrique grave.

Dégagez soigneusement les composants internes du boîtier en soulevant l'extrémité inférieure et en tirant doucement.

Les composants sont toujours connectés au boîtier via des câbles, mais ils sont beaucoup plus maniables.

Le module flash est illustré sur le côté droit.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.