Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de l'objectif du Samsung PL200

Kılavuza Dön
İngilizce
Fransızca
Adım 3
Samsung PL200 Lens Replacement: adım 0, 3 resimden 1. Samsung PL200 Lens Replacement: adım 0, 3 resimden 2. Samsung PL200 Lens Replacement: adım 0, 3 resimden 3.

  • Remove the single 3 mm screw securing the circuit board with a Phillips #000 screwdriver.

  • Remove any leftover tape on the circuit board and screen.

  • Unplug and remove the wires from the circuit board using a set of tweezers.

À l'aide d'un tournevis cruciforme n ° 000, retirez la vis de 3 mm maintenant la carte de circuit imprimé en place.

Retirez tout ruban adhésif sur le circuit imprimé et l'écran. Il est inutile et peut être jeté.

À l'aide d'une pince à épiler, débranchez les fils du circuit imprimé et retirez-le.

-[* red] Using a #000 Phillips head screwdriver, remove the 3mm screw holding the circuit board in place.
-[* black] Remove any tape on the circuit board and screen. It is unnecessary and can be thrown away.
-[* orange] Using Tweezers, unplug the wires from the circuit board and remove it.
+[* red] Remove the single 3 mm screw securing the circuit board with a Phillips #000 screwdriver.
+[* black] Remove any leftover tape on the circuit board and screen.
+[* orange] Unplug and remove the wires from the circuit board using a set of [product|IF145-020|tweezers].

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.