Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Almanca
Adım 5
Before laying it out on the chopping block, we'll try something non-destructive: removing the band. Pressing this button on the back case releases a spring-loaded metal peg in the band, allowing it to slide right out. If you're looking forward to swapping out bands, there's not much to it, physically. However, Apple would prefer that you only use bands from the same collection. No Link Bracelets on your Watch Sport, please.
  • Before laying it out on the chopping block, we'll try something non-destructive: removing the band.

  • Pressing this button on the back case releases a spring-loaded metal peg in the band, allowing it to slide right out.

  • If you're looking forward to swapping out bands, there's not much to it, physically. However, Apple would prefer that you only use bands from the same collection. No Link Bracelets on your Watch Sport, please.

  • The Sport Band is all plastic—or, more accurately, elastomer—with no metal watch band pins.

  • Assembled in China!

Bevor die Uhr auf das Hackbrett kommt, versuchen wir etwas weniger Zerstörerisches: das Armband entfernen.

Durch Drücken des Knopfes auf der Geräte-Rückseite wird ein federbelasteter Metallstift im Armband gelöst, wodurch dieser einfach aus der Halterung geschoben werden kann.

Wenn du dich auf das Tauschen der Armbänder freust, gibt es nicht viel zu beachten. Allerdings will Apple, dass du nur Armbänder aus der selben Kollektion nutzt. Kein Gliederarmband für deine Watch Sport, sorry.

Das Sportarmband ist komplett aus Plastik – genauer Elastomer – ohne Metallstifte zur Fixierung.

Montiert in China!

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.