Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 7 çevriliyor
Adım 7
-
Using the plastic opening tool, pry apart the bottom of the camera at the line between the four removed screws.
-
Place the camera on its lens and use the plastic opening tool to pry at the crack in the case on all four sides of the camera.
-
Apply moderate force to the backside of the camera enclosure until the two pieces separate.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.