Ana içeriğe geç

Canon PowerShot SX50 HS Rear Case Replacement

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Almanca
Adım 2
Canon PowerShot SX50 HS Rear Case Replacement: adım 0, 2 resimden 1. Canon PowerShot SX50 HS Rear Case Replacement: adım 0, 2 resimden 2.
  • Remove the two Phillips #000 screws, length 3 mm, on the left side of camera.

  • Remove the Phillips #000 screw, length 4 mm, located between the two 3 mm screws.

  • Remove the two Phillips #000 screws, length 4 mm, on the bottom left corner of the camera.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.