Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Fransızca
Adım 6
Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together. Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.
  • Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together.

  • Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.

Commencez dans un coin, là où le boîtier et le côté se touchent. Utilisez une spatule (spudger) métallique pointue pour séparer la colle qui maintient les deux parties ensemble.

Faites glisser la spatule métallique le long de la rainure pour séparer le boîtier arrière du reste de l'enceinte.

-[* black] Start in a corner, where the casing and the side meet. Use a pointed metal spudger to pry apart the glue holding these seams together.
-[* black] Slide the metal spudger along these seams to separate the back casing from the rest of the speaker.
+[* black] Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together.
+[* black] Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.