Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 6
Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together. Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.
  • Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together.

  • Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.

从一个角落开始,套管和侧面相遇。 用尖头的金属撬棒将这些接缝的胶水分开在一起。

沿着这些接缝滑动金属撬棒,将后盖与扬声器的其余部分分开。

-[* black] Start in a corner, where the casing and the side meet. Use a pointed metal spudger to pry apart the glue holding these seams together.
-[* black] Slide the metal spudger along these seams to separate the back casing from the rest of the speaker.
+[* black] Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together.
+[* black] Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.