Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.
Adım 2 çevriliyor
Adım 2
-
Use your finger to flip the switch that holds the dual ribbon connector in place.
-
Gently use tweezers to disconnect the dual ribbon connector and the thin blue ribbon connector to the right of it from the circuit board.
[* icon_reminder] Don't forget to close these switches and lock the film back into place when reassembling the camera. | |
[* red] Use your finger to flip the switch that holds the dual ribbon connector in place. | |
- | [* black] Gently use tweezers to disconnect the dual ribbon connector and the thin blue ribbon connector to the right of it from the circuit board. |
+ | [* black] Gently use [product|IF145-020|tweezers] to disconnect the dual ribbon connector and the thin blue ribbon connector to the right of it from the circuit board. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.