Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Fransızca

Adım 1 çevriliyor

Adım 1
DO NOT attempt to desolder the white shrink wrapped wire located at the bottom left of the trigger assembly. It requires advanced soldering techniques and isn't necessary. The soldering iron is hot and could burn you.
  • DO NOT attempt to desolder the white shrink wrapped wire located at the bottom left of the trigger assembly. It requires advanced soldering techniques and isn't necessary.

  • The soldering iron is hot and could burn you.

  • Take note of where each wire is attached to the trigger assembly for resoldering the new trigger.

  • Use the soldering iron to desolder and remove the red, blue, and three black wires.

  • If you don't know how to desolder, or need to brush up on your skills, iFixit posted a How To Solder and Desolder Connections guide.

NE PAS tenter de dessouder le fil blanc rétractable situé en bas à gauche de l'assemblage de la gâchette. Cela nécessite des techniques de soudure avancées et n'est pas nécessaire.

Le fer à souder est chaud et pourrait vous brûler.

Prenez note de l'endroit où chaque fil est attaché à la gâchette afin de ressouder la nouvelle gâchette.

Utilisez le fer à souder pour dessouder et retirez les fils rouge, bleu et les trois fils noirs.

Si vous ne savez pas comment dessouder, ou si vous avez besoin de rafraîchir vos connaissances, iFixit a publié un guide - Comment souder et dessouder les connexions.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.