Adım 4 çevriliyor
Adım 4
Disconnecting the battery
-
Note: While disconnecting the battery, you will have to hold the Display assembly upward with one hand, while removing the screws and retaining plate with the other hands.
-
Remove three Phillips screws:
-
1x 1.8 mm Phillips Screw 1x 1.6 mm Phillips screw and 1x 1.2 mm Phillips screws
-
Be careful to only pry up the battery connector and not to pry up the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.