Ana içeriğe geç
İngilizce
Çince
Step 5
Remove the three Phillips screws securing the EMI shield to the logic board. ( The upper right screw is an aluminum screw which makes it non-magnetic. ) Two 1.2mm Phillips Screws
Removing the EMI shield
  • Remove the three Phillips screws securing the EMI shield to the logic board. ( The upper right screw is an aluminum screw which makes it non-magnetic. )

  • Two 1.2mm Phillips Screws

  • 1x 1.6mm Phillips non-magnetic Phillips Screws

  • In order to remove the EMI shield, slightly lift it upward at an angle using tweezers, then slide the EMI shield toward the battery and remove it.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.