Ana içeriğe geç
İngilizce
Çince
Adım 8
Starting at the top of the phone, remove the two Phillips screws holding the camera flash retaining plate. 1x 1.5mm Phillips Srew (RED)
Removing Accessories
  • Starting at the top of the phone, remove the two Phillips screws holding the camera flash retaining plate.

  • 1x 1.5mm Phillips Srew (RED)

  • 1x 2.3mm Phillips Screw ( Green)

  • Use tweezers to carefully fold the flash flex cable upward.

  • NOTE: The metal box that the flash module rests in will usually stay adhered to the cable. Should they separate, set aside the metal housing for later installation.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.