Ana içeriğe geç
İngilizce
Çince

Adım 10 çevriliyor

Step 10
Disconnect the dock connector cable connector from the board using the pointed end of the nylon spudger as shown. Peel the dock connector cable from the logic board. Disconnect the cellular service antenna using the pointed end of the nylon spudger under the metal clasp.
Dock Connector cable
  • Disconnect the dock connector cable connector from the board using the pointed end of the nylon spudger as shown.

  • Peel the dock connector cable from the logic board.

  • Disconnect the cellular service antenna using the pointed end of the nylon spudger under the metal clasp.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.