Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

İngilizce
İtalyanca

Adım 12 çevriliyor

Adım 12
Remove the logic board screw. 2x 2.8mm standoff screws. ( RED) 2x 2.3mm Phillips screws. (BLUE)
Logic Board screws
  • Remove the logic board screw.

  • 2x 2.8mm standoff screws. ( RED)

  • 2x 2.3mm Phillips screws. (BLUE)

  • One 2.6mm standoff screw.

  • CAUTION: Do not pull the logic board out! The Wi-Fi antenna is connected to the underside of the logic board. Use the flat end of the nylon spudger to gently lift the lower end of the logic board, enough to grip for removal.

  • Once done, roll the logic board over and disconnect the Wi-Fi antenna using the pointed end of the nylon spudger from under the antenna's clasp.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.