Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 17 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 6
Slide the pick along the edge of the display, towards the headphone jack. If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
  • Slide the pick along the edge of the display, towards the headphone jack.

  • If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

  • Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

  • A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

ピックをディスプレイの淵に沿って、ヘッドホンジャック方向へスライドさせます。

ピックをスライドさせる時に接着剤からの抵抗を感じる場合は、iOpenerでのヒーティング手順を繰り返し、さらに温めます。

フューズされたLCDとフロントパネルの間にピックを指し込まないよう注意して下さい。ディスプレイが壊れる可能性があります。

目安として、ピックをiPadに1/4インチ(6mm)以上挿し込まないようにして下さい。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.