Ana içeriğe geç

Retina MacBook 2015 Opening Lower Case Assembly

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 1 çevriliyor

Adım 1
Retina MacBook 2015 Opening Lower Case Assembly, Unfasten the lower case: adım 0, 1 resimden 1.
Unfasten the lower case
  • Before proceeding, unplug and power down your MacBook. Close the display and flip it upside-down.

  • Remove the following eight screws securing the lower case:

  • Two 1.8 mm P5 Pentalobe screws

  • Four 2.9 mm P5 Pentalobe screws

  • Two 6.1 mm P5 Pentalobe screws

  • Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.