Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
Fransızca
Adım 2
Remove the Home Button bracket and peel up the tape connected to it. During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
  • Remove the Home Button bracket and peel up the tape connected to it.

  • During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it

  • Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

  • Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Retirez le support du bouton home et décollez le ruban adhésif qui lui est fixé.

Lors du remontage, après avoir installé le bouton d'accueil, vous devrez coller ce support pour le fixer.

Grattez autant que possible l'ancien résidu d'adhésif du support, puis nettoyez-le avec de l'acétone ou de l'alcool isopropylique concentré (90% ou plus).

Fixez le support avec de la colle thermofusible, de la superglue ou du ruban adhésif double face haute résistance. Assurez-vous que le support est correctement aligné avant de laisser sécher votre adhésif, sinon le bouton d'accueil ne cliquera pas lorsqu'il sera enfoncé.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.