Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

İngilizce
Almanca
Adım 6
Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
  • Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.

  • Remove the 4.8 mm standoff screw near the headphone jack.

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Entferne die 2,5 mm Kreuzschlitzschraube #000, die das Logic Board bei der Ein-/Ausschalttaste befestigt.

Entferne die 4,8 mm Abstandsschraube bei der Kopfhörerbuchse.

Abstandsschrauben lassen sich am besten mit einem iPhone Standoff Bit (Abstandsschrauben-Bit) und einem Bithalter entfernen.

Zur Not geht es auch mit einem kleinen Schlitzschraubendreher, sei aber besonders vorsichtig, damit du nicht abrutschst und umliegende Komponenten beschädigst.

[* red] Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
[* orange] Remove the 4.8 mm standoff screw near the headphone jack.
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.