Eşyalarını Tamir Et Topluluk Mağaza

Installazione Unità Ottica nel MacBook Core 2 Duo

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 22 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
İtalyanca
Adım 8
MacBook Core 2 Duo Optical Drive Replacement: adım 0, 1 resimden 1.

  • Remove the 2 mm Phillips #00 screw securing the rear corner of the optical drive.

  • When reinstalling this screw, make sure none of the cables nearby get caught under the screw's head.

  • The silver-jacketed Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to remove the screw holding the ground shield lugs for the two nearby cables before you can move the Bluetooth cable aside sufficiently. This screw is 7mm in earlier models, and may be 4.2mm in Santa Rosa/Penryn and 2009 models.

Rimuovere la vite con testa a croce da 2 mm che fissa l'unità ottica.

Il cavo Bluetooth potrebbe coprire la vite, pertanto spostarlo di lato con attenzione prima di iniziare a svitare.

-[* red] Remove the 2 mm Phillips #00 screw securing the optical drive.
-[* orange] The Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to unscrew the cable clip to free the cable enough.
+[* red] Remove the 2 mm Phillips #00 screw securing the rear corner of the optical drive.
+ [* icon_note] When reinstalling this screw, make sure none of the cables nearby get caught under the screw's head.
+[* orange] The silver-jacketed Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to remove the screw holding the ground shield lugs for the two nearby cables before you can move the Bluetooth cable aside sufficiently. This screw is 7mm in earlier models, and may be 4.2mm in Santa Rosa/Penryn and 2009 models.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.