Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Fransızca

Adım 12 çevriliyor

Adım 12
Once you do that, you will see the screen has only one connector. Use the hobby knife to lift up the adhesive tape (Be careful not to cut it) Pull the adhesive tape back, and grab the back of the connector with both your fingers, and gently pull the connector back out. Now the screen is loose.
  • Once you do that, you will see the screen has only one connector. Use the hobby knife to lift up the adhesive tape (Be careful not to cut it) Pull the adhesive tape back, and grab the back of the connector with both your fingers, and gently pull the connector back out. Now the screen is loose.

Une fois que vous faites cela, vous verrez que l'écran n'a qu'un seul connecteur. Utilisez le couteau hobby pour lever le ruban adhésif (veillez à ne pas le couper). Tirez le ruban adhésif vers l'arrière et saisissez l'arrière du connecteur avec vos deux doigts, puis retirez-le doucement. Maintenant, l'écran est lâche.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.