Ana içeriğe geç
İngilizce
Fransızca

Adım 1 çevriliyor

Adım 1
Keep the TOMTOM oriented so the curve is on the bottom. Locate the four 1mm Philips #J1 head screws attached to the motherboard. Unscrew each of these in a counter clockwise direction. When reassembling screw back in a clockwise direction.
  • Keep the TOMTOM oriented so the curve is on the bottom. Locate the four 1mm Philips #J1 head screws attached to the motherboard.

  • Unscrew each of these in a counter clockwise direction.

  • When reassembling screw back in a clockwise direction.

  • The second picture is to represent where the four screws are located. The LCD screen does not disconnect from the motherboard until the next step

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.