Adım 1 çevriliyor
Adım 1
-
Remove all the screws using your Phillips #00 holding the back plate in place. This includes:
-
On the Back: Unscrew the 4mm screw to the right of the viewfinder.
-
On the Bottom:
-
Unscrew the 3mm screw in the top left corner.
-
Unscrew the four 3mm screws under the battery cover.
-
On the Right Side: Unscrew the one 3mm screw holding the right-side panel.
-
On the Left Side: Unscrew the two 2mm screws holding the left-side panel.
- | [* black] Remove all the screws holding the back plate in place. This |
---|---|
- | [* red] On the Back: Unscrew the 4mm screw to the right of the viewfinder |
+ | [* black] Remove all the screws using your Phillips #00 holding the back plate in place. This includes: |
+ | [* red] On the Back: Unscrew the 4mm screw to the right of the viewfinder. |
[* black] On the Bottom: | |
- | [* orange] Unscrew the 3mm screw in the top left corner |
- | [* yellow] Unscrew the four 3mm screws under the battery cover |
+ | [* orange] Unscrew the 3mm screw in the top left corner. |
+ | [* yellow] Unscrew the four 3mm screws under the battery cover. |
[* green] On the Right Side: Unscrew the one 3mm screw holding the right-side panel. | |
[* black] On the Left Side: Unscrew the two 2mm screws holding the left-side panel. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.