Eşyalarını Tamir Et Topluluk Mağaza

L.L.Bean Rolling Backpack Handle disassembly and lubrication

Önceki adım Sonraki adım

Adım 17 çevriliyor

Kılavuza Dön
İngilizce
İspanyolca
Adım 17
L.L.Bean Rolling Backpack Handle disassembly and lubrication, Middle shaft into outer shaft: adım 0, 3 resimden 1. L.L.Bean Rolling Backpack Handle disassembly and lubrication, Middle shaft into outer shaft: adım 0, 3 resimden 2. L.L.Bean Rolling Backpack Handle disassembly and lubrication, Middle shaft into outer shaft: adım 0, 3 resimden 3.
Middle shaft into outer shaft

  • Insert the middle shaft into the bottom of the outer shaft, making sure that the pin is sticking out opposite the lower hole in the outer shaft.

  • No matter, the pin from the inner shaft is going to pop out through that hole.

  • Press that pin in so the middle shaft sticks out the top of the outer shaft. Heck, also get the inner shaft to stick out the middle shaft. Luckily, getting the middle shaft through the upper bushing was easy.

  • You may need to put the wire plunger into the inner shaft and press it down while pulling up on the inner shaft. Hey, did you notice how easy it was to press that plunger down now that you've lubricated things?

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.