Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Çince

Adım 13 çevriliyor

Adım 13
Gently pry the tape away and pull out the connector for power. Watch out for the earthing strip you can see in the picture.
Power cable from USB input
  • Gently pry the tape away and pull out the connector for power.

  • Watch out for the earthing strip you can see in the picture.

  • Mine was full of green copper corrosion. Cleaned as best I could and re-inserted. Still very very dead, no charge light, with or without SD card, nothing.

  • Second connector appears to be for the sensors that switch it on when you hold it. Did not touch.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.