Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
İspanyolca

Adım 18 çevriliyor

Adım 18
The camera head can only come out once you have the main assembly out. The lens ring has a bajonet connection, seal and glue. Bajonet is anti clockwise to release. All it needs is about 1 mm.
Camera head tips for the brave.
  • The camera head can only come out once you have the main assembly out. The lens ring has a bajonet connection, seal and glue. Bajonet is anti clockwise to release. All it needs is about 1 mm.

  • Its quite hard to get any kind of grip on it. Leave it in place if you can.

  • Don't touch the 4 screws on the back of the camera head, they hold the sensor to the lens assembly.

  • Here are some pics of the denstist tools I used to break the little latches and get under the button.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.