Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 12 çevriliyor

Adım 12
At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.
  • At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.

  • Again, there are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.

  • Once the putty knife has cleared the lip of the rear panel, angle the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the iPod via the gap between the plastic opening tools.

  • Push with your fingers on the rear panel behind the putty knife to minimize bending. Ever so slightly flex the putty knife to ensure that most of the metal tabs on this side of the iPod are disengaged.

在一个角度上,请仔细地将一个约1/8英寸的油灰刀插入两个打开工具之间的缝中。

再次,沿着后面板的内部延伸有细金属导轨,因此在插入油灰刀时要非常小心。

一旦油灰刀已经清除了后面板的唇部,将油灰刀倾斜使其垂直,并且仔细(但牢固地)通过塑料打开工具之间的间隙将其向下摆动到iPod中。

用手指推在油灰刀后面的后面板上,以减少弯曲。 如此轻轻地弯曲油灰刀,以确保iPod的这一侧的大部分金属片脱开。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.