Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Almanca

Adım 17 çevriliyor

Adım 17
There are two ribbon cables connecting the rear panel to the rest of the iPod. In the following step, be careful not to damage these ribbon cables.
  • There are two ribbon cables connecting the rear panel to the rest of the iPod. In the following step, be careful not to damage these ribbon cables.

  • Grasp the front panel assembly with one hand and the rear panel with the other.

  • Take a deep breath!

  • Gently (GENTLY) disengage the remaining clips on the rear panel by pulling the tops of the front and rear panels away from each other (think of the bottom of the iPod as a hinge), taking great care not to damage the ribbon cables holding the two halves together.

Zwei Flachbandkabel verbinden das Rückteil mit dem Rest des iPod. Achte in den folgenden Schritten darauf diese nicht zu beschädigen.

Fasse die Front Panel Einheit mit einer Hand und das Rückteil mit der anderen.

Atme tief ein!

Löse vorsichtig (VORSICHTIG) die restlichen Klammern am Rückteil, indem du die Oberkante beider Gehäusehälften voneinander weg ziehst. Verstehe dabei die Unterkante als Achse eines Scharniers. Achte sehr darauf dass Flachbandkabel die beiden Hälften verbinden.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.