Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 28 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 4 çevriliyor

Adım 4
When installing new RAM modules, it is important to orient them correctly. Be sure the small notch cut into each RAM module (shown in the first picture) mates with the protrusion in each RAM slot (shown in the second picture). Your iMac has four RAM slots. Be sure to slide each RAM module into its slot horizontally. This will prevent getting the modules stuck between two of the adjacent slots.
  • When installing new RAM modules, it is important to orient them correctly.

  • Be sure the small notch cut into each RAM module (shown in the first picture) mates with the protrusion in each RAM slot (shown in the second picture).

  • Your iMac has four RAM slots. Be sure to slide each RAM module into its slot horizontally. This will prevent getting the modules stuck between two of the adjacent slots.

  • Once you have oriented the new RAM modules correctly, gently slide them completely into the iMac and use your thumbs to firmly seat them in their sockets.

新しいRAMモジュールを装着する際は、正しい方向に取り付けることが重要です。

各RAMモジュールに切り込まれた小さなノッチ(1番目の画像で確認できます)がRAMスロットの突起と合わさります。(2番目の画像を参照ください)

お持ちのiMacに4つのRAMスロットがあります。各モジュールを差し込む際は、スロットに対して水平にスライドします。隣り合う二つのスロットの間でモジュールが詰まるのを防ぐことができます。

正しい装着方向を確認できたら、RAMモジュールをゆっくりとiMacにスライドします。親指を使って、各ソケット上にしっかりと固定してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.