Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
-
Remove the two 1.9mm Phillips #00 screws securing the vibrator to the rear case.
-
Lift the vibrator up and out of the iPhone.
-
Keep these screws separate from the others as these have a smaller diameter than the others.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.