Eşyalarını Tamir Et Topluluk Mağaza

iPod 第5世代 (ビデオ)の交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Japonca
Adım 4
iPod 5th Generation (Video) Case Replacement: adım 0, 3 resimden 1. iPod 5th Generation (Video) Case Replacement: adım 0, 3 resimden 2. iPod 5th Generation (Video) Case Replacement: adım 0, 3 resimden 3.

  • There are four retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.

  • Insert the iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.

  • A small guitar pick can be extremely helpful in opening the iPod. Simply insert it and slide the pick around the case to free the clips to streamline the process.

  • Gently enlarge the existing crevice by wiggling the iPod opening tool and moving it to the left.

  • Continue doing so until the entire side of the iPod is loose.

  • You can then insert an iPod opening tool to the right of the Hold button. Be very careful while inserting the tool, as the display is very fragile.

iPod両側に4つの固定クリップが付いています。 iPod開口ツールを使って、iPodメタル背面から前面のプラスチックを分離します。

iPod開口ツールをiPod左側に挿入し、ツールの先端をメタル背面側に向けます。

小さなギターピックなどは、iPodを開口するのに非常に役立ちます。 ピックを差し込んだら、ケース周辺にスライドさせるだけで、クリップが外れて、作業が簡単になります。

開口ツールを左右に小刻みに動かして、左側に移動すると、隙間がわずかに拡大します。

iPodの端全体が緩むまで作業を続けます。

次に開口ツールをホールドボタンの右側に挿入します。 ディスプレイは非常に壊れやすいため、ツールを挿入する際は十分に注意してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.