Ana içeriğe geç
Almanca
İngilizce

Adım 4 çevriliyor

Step 4
This is the backside. the quadratic black rubber part is the motorized flap of the icecrusher. be careful, ther are some springs, dont loose them.
  • This is the backside. the quadratic black rubber part is the motorized flap of the icecrusher. be careful, ther are some springs, dont loose them.

  • Now, Spray some Silcone-Spray on the moving parts. i have made red circles where i have put on the Spray. just a lille bit, also on the spring.

  • Try, move it, when its still noisy apply more silconespray while moving it in and out.

  • Thats it. reasemble, as last step clip on the clear plastic on the tube from the water, then the notches and then the clipse.

  • done :)

This is the backside: The quadratic black rubber part is a motorized flap of the ice-crusher, be careful with it, there are fragile springs, dont loose them.

Now spray some SILICONE_SPRAY on the moving parts, i made some red circles for it. Just a little bit, also on the springs.

TRY, move it, now the noise should gone, whiole moving it.

Thats it, reassemble it, be careful with the notches and clipse.

done. :)

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.