Ana içeriğe geç
İngilizce
Japonca

Adım 1 çevriliyor

Adım 1
Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,
  • Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,

  • Remove the black plastic strip to reveal the speaker assembly. It is hooked underneath the circuit board beneath, force will be required to pry it out. Carefully unplug the microphone connector as you do this, ensuring not to snap it.

Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,

Remove the black plastic strip to reveal the speaker assembly. It is hooked underneath the circuit board beneath, force will be required to pry it out. Carefully unplug the microphone connector as you do this, ensuring not to snap it.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.