Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
-
Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
-
Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.