Ana içeriğe geç
İngilizce
Flemenkçe
Adım 3
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.