Ana içeriğe geç
İngilizce
Almanca
Step 5
Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place. Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place.
Removing the Clutch Inspection Cover
  • Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place.

Entferne die vier T27 Torx Schrauben, die die Wartungsklappe der Kupplung befestigen.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.