Ana içeriğe geç
İngilizce
İspanyolca
Step 8
Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission.
Adding New Oil
  • Insert the nozzle of a funnel into the primary chain inspection hole.

  • Pouring slowly, pour approximately 1 qt of oil into the transmission.

  • As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.

  • This may require less than the entire quart of oil.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.