Ana içeriğe geç
İngilizce
Almanca

Adım 10 çevriliyor

Step 10
Using a T27 Screwdriver head, reinstall the clutch inspection cover. Install the screws in the following order: Top
  • Using a T27 Screwdriver head, reinstall the clutch inspection cover. Install the screws in the following order:

  • Top

  • Bottom

  • Left

  • Right

  • Once all of the screws have been lightly hand-tightened, use a torque wrench to tighten them to their proper specification of 7 - 12 ft-lbs (84 - 108 in-lbs). Tighten the screws in the same order as before.

Befestige mit einem T27 Schraubendreher die Wartungsklappe der Kupplung.

Oben

Unten

Links

Rechts

Ziehe alle Schrauben händisch leicht an, danach benutze einen Drehmomentschlüssel mit 9,49 - 16,28 Nm. Achte darauf, dass sie in der gleichen Reihenfolge festgezogen werden.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.