Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 19 kılavuzları etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.
-
Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.