Eşyalarını Tamir Et Topluluk Mağaza

iPod Touch (1. Generation) Logic Board tauschen

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Almanca
Adım 6
iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 1. iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 2. iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 3.

  • Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.

  • Gently lift the logic board (and attached components) upward.

  • The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.

  • Slide the spudger under the small portion of the logic board. The board should come loose once the spudger has slid almost all the way to the other side.

Klappe das Logic Board vorsichtig hoch. Am Logic Board sind die Kopfhörerbuchse und der Docking-Anschluss angebracht.

Hebe das Logic Board (mit angeschlossenen Bauteilen) nach oben.

Der kleine Abschnitt des Logic Boards, der darunter liegt, verbiegt sich leicht und ist empfindlich. Hebe den Spudger nicht hoch, wenn du die kleine Platine ablöst. Bewege den Spudger nur zur Seite hin.

Schiebe den Spudger unter den kleinen Abschnitt des Logic Boards. Das Board sollte sich ablösen, wenn der Spudger an der anderen Seite angelangt ist.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.