Ana içeriğe geç

iPod Touch 初代のロジックボードの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 6
iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 1. iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 2. iPod Touch 1st Generation Logic Board Replacement: adım 0, 3 resimden 3.
  • Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.

  • Gently lift the logic board (and attached components) upward.

  • The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.

  • Slide the spudger under the small portion of the logic board. The board should come loose once the spudger has slid almost all the way to the other side.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.