Ana içeriğe geç

Mac Mini Mitte 2011 Logic Board Austausch

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 20 kılavuzları etkileyecektir.

İngilizce
Almanca
Adım 4
Mac mini Mid 2011 Logic Board Replacement: adım 0, 3 resimden 1. Mac mini Mid 2011 Logic Board Replacement: adım 0, 3 resimden 2. Mac mini Mid 2011 Logic Board Replacement: adım 0, 3 resimden 3.
  • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

  • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case.

  • Remove the Mac mini Logic Board Removal tool.

Um die Hauptplatine zu entfernen müssen die beiden zylindrischen Stäbe des Mac Mini Logic Board Removal Tools in die beiden rot markierten Öffnungen eingeführt werden. Führt man Instrumente in irgendwelche anderen Öffnungen als die rot markierten auf dem Logic Board ein, kann es zerstört werden.

Führe also das Mac Mini Logic Board Removal Tool in die beiden rot markierten Öffnungen ein. Achte darauf, dass es Kontakt zur oberen Seite des Außengehäuses unter dem Logic Board hat, bevor du weitermachst.

Ziehe das Tool vorsichtig in Richtung des I/O Boards. Das Logic Board und die ganze I/O Board Einheit sollte etwas aus dem Gehäuse rutschen.

Beende das Ziehen, wenn du siehst, dass das I/O Board sich sichtlich vom Gehäuse gelöst hat.

Entferne das Mac Mini Logic Board Removing Tool.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.