Eşyalarını Tamir Et Topluluk Mağaza

Mac Mini 中期2011 硬盘更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Çince
Adım 4
Mac Mini Mid 2011 Hard Drive Replacement: adım 0, 3 resimden 1. Mac Mini Mid 2011 Hard Drive Replacement: adım 0, 3 resimden 2. Mac Mini Mid 2011 Hard Drive Replacement: adım 0, 3 resimden 3.

  • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

  • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case.

  • Remove the Mac mini Logic Board Removal tool.

要卸下逻辑板，就需要将Mac mini 逻辑板拆卸工具插入图中标红的的孔中。 将仪器插入标注的孔外的区域将有可能损坏逻辑板。

将逻辑板拆卸工具插入标红的两个孔中。再继续进行下一步时请 确保，工具与逻辑板下的外壳顶部接触。

小心的将工具拉向I/O板。 此时逻辑板和I/O板组件应该稍微滑出外壳。

当发现I/O板与外壳明显分离时请停止撬动。

移除逻辑板拆卸工具。

-[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
-[* black] Insert the [product|IF145-159|Mac Mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
+[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
+[* black] Insert the [product|IF145-159|Mac mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* icon_note] Cease prying when the I/O board is visibly separated from the outer case.
-[* black] Remove the Mac Mini Logic Board Removal tool.
+[* black] Remove the Mac mini Logic Board Removal tool.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.