Eşyalarını Tamir Et Topluluk Mağaza

Reemplazo de la tarjeta AirPort/Bluetooth del iMac Intel 21.5" Pantalla Retina 4K

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Önceki adım

Adım 6 çevriliyor

Kılavuza Dön
İngilizce
İspanyolca
Adım 6
iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 3.

  • During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.

  • With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.

  • Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.

  • Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.

  • For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Durante el montaje, si la instalación de la tarjeta AirPort te resulta difícil, puedes utilizar unas pinzas curvadas para ayudar a orientar la tarjeta e introducirla en su ranura de la parte posterior de la placa lógica.

Con las pinzas apuntando hacia abajo, introduce las puntas de las pinzas a través de los orificios para tornillos de la tarjeta AirPort, junto a las tomas de sus conectores de antena.

Con el dedo, presiona hacia abajo el borde de la tarjeta AirPort para inclinarla hasta que quede aproximadamente paralela a la placa lógica.

Alinea la tarjeta AirPort con su ranura en la placa lógica, y presiona la tarjeta en la ranura hasta que los orificios de los tornillos más cercanos al conector se alineen con los de la placa lógica.

Como referencia, la tercera foto muestra la placa lógica desmontada y dada la vuelta para ver claramente cómo se instala la tarjeta AirPort.

-[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.
+[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved [product|IF145-020|tweezers] to help orient the card and insert it into its slot on the back of the logic board.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.
[* black] Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.
[* black] Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
[* icon_note] For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.