Eşyalarını Tamir Et Topluluk Mağaza

Changement carte AirPort/Bluetooth iMac Intel 21,5" Retina 4K

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Önceki adım

Adım 6 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 6
iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 3.

  • During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.

  • With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.

  • Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.

  • Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.

  • For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Lors du remontage, si remettre la carte AirPort s'avère difficile, vous pouvez utiliser une pincette courbée pour insérer la carte dans son emplacement au rétro de la carte mère.

En orientant la pincette vers le bas, insérez ses pointes dans les trous de vis de la carte AirPort, à côté des prises des connecteurs d'antenne.

Avec votre doigt, appuyez sur le bord de la carte AirPort pour l'incliner, jusqu'à ce qu'elle soit à peu près parallèle à la carte mère.

Alignez la carte AirPort avec son emplacement sur la carte mère, et enfoncez-la jusqu'à ce que les vis les plus proches du connecteur concordent avec celles de la carte mère.

À titre de référence, la troisième photo montre la carte mère retirée et retournée pour que vous puissiez bien voir l’emplacement de la carte AirPort.

-[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.
+[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved [product|IF145-020|tweezers] to help orient the card and insert it into its slot on the back of the logic board.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.
[* black] Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.
[* black] Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
[* icon_note] For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.