Eşyalarını Tamir Et Topluluk Mağaza

Sostituzione scheda AirPort/Bluetooth iMac Intel 21.5" Display Retina 4K

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Önceki adım

Adım 6 çevriliyor

Kılavuza Dön
İngilizce
İtalyanca
Adım 6
iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement: adım 0, 3 resimden 3.

  • During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.

  • With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.

  • Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.

  • Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.

  • For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Durante il rimontaggio, se installare la scheda AirPort/Bluetooth risulta difficile, puoi usare delle pinzette curve per aiutarti a orientare la scheda e inserirla nel suo slot sul retro della scheda logica.

Con le pinzette inclinate verso il basso, inserisci la punta delle pinzette attraverso i fori della vite nella scheda AirPort, di fianco alle prese del suo connettore dell'antenna.

Usando un dito, premi sul bordo della scheda AirPort per inclinarlo finché è più o meno parallelo alla scheda logica.

Allinea la scheda AirPort con il suo slot sulla scheda logica e premicela finché i fori della vite più vicini al connettore sono allineati con quelli della scheda logica.

Per avere un riferimento, la terza foto mostra la scheda logica rimossa e capovolta, per avere una visuale chiara di com'è installata la scheda AirPort.

-[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.
+[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved [product|IF145-020|tweezers] to help orient the card and insert it into its slot on the back of the logic board.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.
[* black] Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.
[* black] Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
[* icon_note] For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.